123.hp.com/oj3830 - 123 HP COM OJ3830 Printer Setup and Install

123hpcom setup oj3830 Printer Setup

  • 123 HP Officejet 3830 Pinter Setup.
  • HP Officejet 3830 Setup Printer Service.
  • 123 HP Officejet 3830 Printer Driver Installation Setup.
  • 123.hp.com/oj3830 Installation for Windows OS.
  • 123.hp.com/setup 3830 Driver Installation for MAC OS.
  • 123 HP Officejet 3830 Wireless setup Installation .
  • HP Officejet 3830 WI-FI Protected Setup.
  • 123 HP Officejet 3830 Troubleshooting.

Online Support

Setup & Install

Diagnose & Fix

123.hp.com/setup 3830 PRINTER CONFIGURATION

Unpacking the 123.hp.com/oj3830 printer out of its packaging and keeping the power cables ready for connection. Now place the cords firmly in the wall sockets so that the devices do not have loose connections or power problems. Press the Home button on the left corner of the 123.hp.com oj3830 printer when you connect the cords.

How do I configure 123 Hp officejet 3830 printer?

  • If you first switch on the Hp officejet 3830 printer, it may make some noise.
  • Once you see the home screen, use the arrows to pick the language, country and region next to the printer control panel. Press the OK button now.
  • The printer will now be displayed when the 123.hp.com/oj3830 ink cartridges are inserted.
  • Lift the cover of the ink cartridge with the cutouts at the sides of your printer.
  • See the labeling on the back of the cartridge and initially install the tri-color cartridge.
  • Remove the protective tape covering the electrical contacts and ink nozzles. (NOTE: the color on the locking heels should be matched by the color shown on cartridges.) Push the ink cartridges slowly into their slots.
  • Install the black cartridge using the same process.
  • Once you’ve finished installing the original HP cartridges, the Control Panel displays a message box. Click OK Load the input tray stack of paper. The Hp officejet 3830 printer is now printing an alignment page.
  • Once the alignment page is printed, scan the pace print side down on the scanner glass.
  • After the alignment page is scanned, the’ Fitting Successful’ message box is displayed in the control panel of the Hp officejet 3830 printer. To continue, press Ok button.
  • Users can now connect their printer wirelessly or via Ethernet or USB to a network.

After the basic Printer setup is finished, install the printer software by visiting 123.hp.com or inserting the printer CD. Follow the on-screen instructions to complete the installation of the printer. The driver software can be downloaded from the 123.hp.com/oj3830 or 123.hp.com/setup 3830 website.


How to print from your iPhone?

We talked about printing in the past through the AirPrint software. Users can print photos, documents, e-mails or other websites with any integrated iOS software solution from their iPhone.

  • Make sure that you turn on the wireless icon before starting the print job and connect your 123.hp.com/setup 3830 to the Wireless connection network.
  • Open the Wi-Fi settings on your iPhone to check whether you are connected to your 123.hp.com/oj3830 printer’s same wifi network connection.
  • It should be noted that AirPrint can not support public wifi networks such as cellular data connections (3 G or 4 G), Bluetooth and hotspots.
  • Go to the App Store and download a compatible iPhone printing application. Now, the app.
  • Click the share button for the app and find the print icon.
  • Go to the home screen to open the document, photo, email or web page, and choose the share icon. (You click on the Menu otherwise, then touch the Print option.) Tap Print Option after selecting the file.
  • You will have to select a printer from the Printer Options menu.
  • Select the Hp officejet 3830 printer you want to use.
  • Change any print configuration, specify the number of copies to print and then tap Print option to get the work done in print.

When the printing process is complete, the documents or photos can be viewed by double-clicking on the Home button of your iPhone. Go to the center of the 123 hp com oj3830 printer and select the document that was recently printed.

How can I cancel the print job?

If you want to stop the printing process, you can use your iPhone in a jiffy.

  • Press your iPhone’s home button twice.
  • The open and working apps are displayed on the screen.
  • Now select Print Center and tap on it.

Once the Print Center app is open, tap Cancel Printing to stop the print job.

123.HP.COM OJ3830 Printer Driver Installation

While installing the 123.hp.com/oj3830 you’ll need to temporarily connect a USB cable between your printer and pc.

123 hp Officejet 3830 Driver Installation for Windows OS

You will need a operating system of windows 7 or above in order to use the downloadable driver from 123.hp.com/setup 3830 site.

HP Officejet 3830 Driver Installation for MAC OS

Connecting the 123 hp com setup oj3830 Printer to the apple device requires a version above 7.
If the device is not connected through USB or printer connected to wifi
Click on Settings icon on the printer display and proceed to navigate to the option wireless setup wizard
Find out the desired wifi network and then proceed with connecting to the network.
Once connected to the network you can print a network setting page and proceed with the driver installation for the MAC for your HP officejet pro 3830 printer.

123 hp com setup 3830 Officejet Printer Driver Installation

Proceed to System Preferences in Apple Menu which will be available at the top.
Select the Print and Fax from Hardware Selection and go to (+) sign to add the printer.
Once the 123.hp.com/oj3830 printer has been selected proceed with the installation and print a test page.
You can alse get the Printer driver from the 123.hp.com/setup 3830 for the MAC os version you have.

123.hp.com/oj3830 Printer USB Connection

While the printer is detected via USB cable the settings of the OS will get auto detected and a generic driver will get installed.
The generic driver will not have all the features and hence you need to install the software from 123.hp.com/oj3830.
The setup will direct you through the complete installation with the optimum settings accepted by the microsoft opearting system used.
The driver installation of 123.hp.com/setup 3830 can be done more easily for windows 8, windows 8.1 & windows 10.
The drivers have versions and based on the windows operating system used the ease of access for the user increases.
If you are not able to connect then you can contact our technicians who will help you out with the fix.

123.hp.com/oj3830 Printer Connection without USB

When the microsoft windows device doesn’t have connected to the HP officejet 3830, it requires a manual setup of the printer to the wifi network and then proceed with the driver installation.
You have go to the wifi icon or button on the printer and then proceed with connecting the Hp officejet 3830 printer to the desired WIFI network.
Before proceeding with the driver installation you require the details of the WIFI network to which you wish to connect the HP officejet 3830 printer. Like the username and password.
Once detected by the micorsoft windows 8, windows 8.1, windows 10, windows 7, windows vista device, the IP of the printer need to be located.
Once the IP has been found the printer can be connected and the driver of the printer is available in 123.hp.com/oj3830.
The specific drivers can also be found under the support hpcom website wherein you can download the specific driver required and used by you.
If there is any trouble following the procedure the technician here can help you to get connected to the HP pritner.


Users can print wirelessly from a smartphone, tablet, machine or other wifi devices with HP wireless direct – without even having to connect to the existing wifi network. With the Wireless Setup Wizard, you can manage the wireless access to your 123.hp.com/oj3830 printer.

  • Press the wireless icon on the control panel of the 123 hp com setup 3830 printer.
  • Click the button next to the print configuration.
  • By scrolling the Wireless Setup Wizard, click OK. Now the wizard looks for the list of networks available.
  • See if your network name is available. If not, users can manually enter the network.
  • Scroll to New Network Name and click OK.
  • Enter the name and click OK.
  • Use the WEP or WPA key on request.
  • To confirm, click OK. The 123.hp.com/oj3830 printer is now trying to connect to the network.

How to connect a new HP OJ3830 printer?

  • Perform one of the following on the basis of the operating system you are using.
    • Windows 8: Start – – > app bar – – > All Apps – – > Folder with printer name.
    • Windows 7, Windows Vista and Windows XP: Start – – > All Programs – – > HP – – > Printer folder – – > Printer name.
  • Choose Setup and Software of the 123.hp.com/setup 3830 Printer.
  • Select Connect a new printer from the options list and follow the instructions displayed on the screen.

How to change the settings of the network?

  • Press the Wireless icon on the 123.hp.com/oj3830printer’s home screen.
  • Select Settings followed by Advanced Settings.
  • Make the changes you want to the Advanced Settings menu.
  • Now, follow the on-screen instructions to change the settings.

How do I change from a USB connection to a wireless network?

  • Perform one of the following on the basis of your operating system.
    • Windows 8: Start ––> app bar ––> All Apps ––> Folder with printer name.
    • Windows 7, Windows Vista and Windows XP: Start ––> All Programs ––> HP ––> Printer folder ––> Printer name.
  • Select Setup & Software of 123.hp.com/oj3830 Printer.
  • Tap on Convert a USB connected printer to wifi .



  • Wireless 802.11/b / g / n network that includes an access point or router enabled by WPS.
  • Wireless network connection or NIC (network interface card) computer or laptop.
  • You should connect your computer or laptop to a wifi network that the Hp officejet 3830 printer is connected to.


  • Press and hold down the Wireless button to start the WPS button for a few seconds. The wireless light now begins to blink.
  • Now, on your router, press the WPS (Wi-Fi Protected Setup) button.
  • It takes a few minutes for the HP Officejet 3830 printer to establish the wireless connection.


    • Press the Wireless button on the control panel to view the men.
    • When you see the 123 hp com setup oj3830 printer in error or perform a job, wait until the printer completes the task and press the Wireless button.
    • Select Settings from the display screen of the printer control panel.
    • Now, tap Protected Wi-Fi Setup from the list of available options.
    • If you have a Push button on the wireless router, tap Push and follow the instructions.
    • If not, choose PIN and follow the on-screen prompts.

How do I connect 123.hp.com/setup 3830 printer wirelessly without a router?

  • Switch on the direct wireless from the control panel of the 123 hp com setup 3830 printer.
    • Touch the Direct wifi icon on the home screen of the printer.
    • Choose Settings if the Wireless Direct setting is Off.
    • Select ON (No Security) or ON (With Security) again, to Wireless Direct.
  • If the Wireless Direct is enabled, you can find the wireless direct and password.
    • Click on the direct wireless icon on the home screen of the printer.
    • To display the direct wireless name, select Display Name.
    • Select Password display to display the password.
  • Switch on your computer or mobile device wifi connection.
  • Search for the desired 123.hp.com/oj3830 printer and connect it to the direct wireless name.
  • Enter the Wireless Direct password when requested.
  • Try to print a mobile or computer document or photo.

How to Connect 123.hp.com/oj3830 Printer to Windows?

  • Click on your desktop screen’s Start button.
  • Type’ Add Printer’ in the menu bar search.
  • A new dialog box will appear and ask what type of printer you would like to install.
  • Choose Wireless network or Bluetooth printer to be added.
  • Choose’ Use an existing port’ and click Next.
  • If the USB connection is selected, select Add a local printer.
  • Select the name of the printer from the list of available options and then click Next.
  • A new dialog box opens to request that the Hp officejet 3830 printer driver be installed.
  • Go to the Update tab for Windows and then tap HP or Hewlett Packard.

How to Connect 123.hp.com/oj3830 Printer on MAC?

  • To select the Network or Wireless menu, click Setup.
  • Tap Wireless Setup Wizard from the list of available options.
  • The wifi networks list is on the screen. Select the one you want to use.
  • On request, enter the WEP password of the wireless network key.
  • You will soon connect your printer to the wifi network. Once connected, print a test report to see whether the Hp officejet 3830 printer works correctly.
  • Also, the MAC printer driver should not be installed separately. When you update the Apple device software, it will be installed automatically.
  • Now use a USB connection to connect your 123.hp.com/setup 3830 printer and your Apple device.
  • Connect other devices via wired or wireless connection to the Internet.
  • Go to the Apple device menu option and update touch software. Otherwise, select Software Updates and choose About this Mac.
  • Select Install now.

How to select your printer on your MAC?

  • Open the menu of Apple and select System Preferences.
  • Go to the Hardware Register and select Print and Fax.



Select the Network or Wireless menu on your device.
Tap Wireless Wizard Setup. On request, enter the SSID and the WEP (password) key.
Your printer will shortly be connected to the wireless network.
Now print a test report to check if the printer is all right.

How to print on 123.hp.com/oj3830 Printer Wirelessly?

You can print wirelessly on your HP Officejet 3830 printer using HP wireless directly without connection to a wireless network.

How to print from a Wireless Computer (Windows)?

  • Ensure that you switch on the HP Wireless Direct option.
  • Now you need to turn on the Wi-Fi connection on your 123.hp.com/oj3830 printer.
  • Connect to a new network from your computer as usual.
  • Select the wireless network to which you want to connect. (NOTE: select the name of your Hp-Print0**-ENVY XXXX) printer.
  • Enter a network security code when prompted.
  • If your printer uses the network via USB, do the following.
  1. Do the following, based on the operating system you use,
  • Windows 8: Start – – > app bar – – > All Apps – – > Printer Name – – > Utilities.
  • Windows 7, Windows Vista and Windows XP: Start – – > All Programs – – > HP – – > Printer Folder.
  1. Select Setup & Software for the Hp officejet 3830 printer and then tap Connect a new printer.
  2. In the Connection Options dialog box, select Wireless option.
  3. Select the HP printer software from the list displayed.
  4. Follow the instructions on the screen to finish the process.
  • Print the document that you need to.

How to print from a wireless computer (OS X)?

  • Make sure your HP direct wireless is switched on.
  • Switch AirPort.
  • If you click on the AirPort icon, select the direct HP name listed as HP-Print-**-ENVY XXXX)
  • Add your HP printer.
  • In the System Preferences section, select Print & Fax or Print & Scan, depending on your operating system.
  • Select the + (plus) symbol from the left corner of the list of printers.
  • Tap on the 123.hp.com/oj3830 printer you want to use and then click Add.


Hp Officejet 3830 printer does not print (no prints)

  • If print jobs are stuck in the queue, then you cancel and reboot all documents in the queue. Try to print a page after the reboot process has been completed.
  • If your printing printer is switched off, an alert message should appear on your computer screen. If it doesn’t, then the HP software you have installed has a problem. Uninstall and reinstall the software to prevent further problems.
  • Checking whether all cable connections are secure and tight is always essential. If there is a loose connection, replace it with a new cable.
  • If the blue light on the wireless icon doesn’t blink, you have to check the wifi connection of your 123.hp.com/oj3830 printer. Try to print a wireless test report in order to diagnose and resolve your Hp officejet 3830 printer problems.
  • Check whether the firewall software installed on your computer prevents your computer and printer from communicating. In that case, temporarily deactivate the firewall and continue with the print job. Switch on the firewall once the pages have been printed.
  • If your 123.hp.com/oj3830 printer still does not respond to the above steps, try rebooting both the computer and the printer.

If something is missing or incorrect on the page

  • Check the length of the USB cable and the location of the 123 hp com oj3830 printer. Sometimes high USB-generated electromagnetic fields can cause slight distortions and spoil the printed quality.
  • Shift your 123.hp.com/oj3830 printer away from the electromagnetic field in that case.
  • Use a cable that is less than 3 meters long to minimize the effects of the electromagnetic field is recommended.

General Customer Queries in HP Officejet 3830 Printer Setup

  • How to print in Officejet 3830 Printer?
  • How to connect Officejet 3830 to my IPhone?
  • HP Officejet 3830 Setup Instructions.
  • HP Officejet 3830 Printer  Setup
  • Hp Officejet 3830 AirPrint setup.
  • HP Officejet 3830 Google Cloud Print Setup.
  • Hp Officejet 3830 setup mac
  • How do I setup my HP Officejet 3830 printer?
  • How do I connect my HP Officejet 3830 printer to wireless network?
  • How do I reset my HP Officejet 3830 Printer?
  • HP Officejet 3830 support
  • HP Officejet 3830 Setup guide
  • How to Install, Replace and Remove 123 hp com Officejet 3830 ink Cartridge?

Contact Our HP Technical Support Team to resolve all HP Officejet 3830 Printer Setup and Installation Issues including above mentioned Queries. We are here to serve you anytime.


We are established third party technical support team, we are not at all associated with any other party or company directly. We sincerely respect other company’s brand name, and logo as well as products. We assure that these are used at our interface only for reference purpose, these do not relate with any category directly. We are totally independent company and we maintain the work and support as a third party only.